Dongguan Yexin Intelligent Technology Co., Ltd.
You are here: Home » News » Industry News » Precautions for CNC machining (2)

Precautions for CNC machining (2)

Views: 4     Author: Site Editor     Publish Time: 2022-03-29      Origin: Site

The previous article introduced some precautions for CNC machining, mainly about the inspection before starting up and some precautions during operation. This article will continue to introduce you to other things that people need to pay attention to when using CNC machining.

Before spraying reagents on the tools,  the operator should clean up the metal chips inside the machine tool. Avoid metal scraps from absorbing oil and attaching to the inside of the machine to cause processing accidents. When performing rough machining and shape cutting, use an air gun to blow away the waste to avoid machining errors. After the CNC turning parts are processed, post-processing should be carried out as soon as possible. If grinding burrs, surface polishing, or further chamfering are required, the parts must be processed and protected as soon as possible to avoid oxidation bumps on the parts. Avoid causing product defects—workpiece rework, etc.

Whether off work or leaving the CNC console in the middle, the operator must accurately hand over the work to the relevant personnel to ensure that the subsequent processing is carried out as usual. Before shutting down, make sure that the tool turntable is in place, the XYZ three-axis is reset, the door is closed, the program on the operation panel is closed, and the primary power connection is cut off. It is not recommended to carry out construction if the voltage is unstable such as wire construction and thunderstorm weather, to avoid irreversible damage to the machine.

The above are the matters needing attention in CNC machining. We are a professional CNC milling company. If you need CNC machining, you can leave your contact information, and we will reply to you in time.

Leave a Message
Contact us





  +86-13631706146 ( Jeanly Wen )       
  Hengjiao Industry Zone, Hengjiao Village, ShiJie Town, Dongguan, Guangdong, China. 523290
Copyright © 2007-2021  Dongguan Yexin Intelligent Technology Co., Ltd. All rights reserved.Technical Support: Molan Network